Send On/Off signal again on datasource update
Posted: Sun 01 Sep 2013, 15:07
Hi,
I am using Switches as Datasources in SK, which are used in schedules to turn on lights and control my window shutters. These window shutters work as followed, ON = Going down, OFF = Going UP. If you send the signal twice, for example ON, wait 3 secs and then again ON, the shutter will stop at its current position.
Now, I also use switches to control these shutters, but when I press the On button twice (like the example above) the shutter does not stop. I'm guessing because the scenario is already set to true so it won't send the on signal again.
Is there a way to send the requested signal again when the datasource gets updated with the same value? Because SK does receive the data (see attached screenshot).
Cheers
I am using Switches as Datasources in SK, which are used in schedules to turn on lights and control my window shutters. These window shutters work as followed, ON = Going down, OFF = Going UP. If you send the signal twice, for example ON, wait 3 secs and then again ON, the shutter will stop at its current position.
Now, I also use switches to control these shutters, but when I press the On button twice (like the example above) the shutter does not stop. I'm guessing because the scenario is already set to true so it won't send the on signal again.
Is there a way to send the requested signal again when the datasource gets updated with the same value? Because SK does receive the data (see attached screenshot).
Cheers