Switch King - Forum

I've tried changing the values. No luck.
The switches and dimmers are all from NEXA. They worked great before, and I thought that a new TellStick DUO would fix the problem. Could low battery make any issues? I can see that the Tellstick receives the signal from the switch.

Switchking has high load / very high load when I click the switches. I only have three switches and three lights. And two temperature sensors.

Do you have any information in your logs that can help us tracking down the load issue?
A faulty USB can give high load since Switch King forces Telldus to retry transmissions.

I just switched the livingroom lights on and off a couple of times. From I click and see the blue lights on the tellstick, until I see the red light and the lights turns on. I takes 6-8 seconds. Same when turning them off.

This is from the log:
{BusinessAccess - Invocation} --<Status> -- 2014-07-28 23:40:20 -- Device with id 10, name stue, native id 10 and code 2:3 has a nonmatching state.
{BusinessAccess - Invocation} --<Status> -- 2014-07-28 23:40:20 -- Device with id 10, name stue, native id 10 and code 2:3 is in semi auto mode that is targetted for cancellation.
{BusinessAccess - Invocation} --<Status> -- 2014-07-28 23:40:20 -- Device with id 10, name stue, native id 10 and code 2:3 is being dimmed to level 100. Method used is TellStickWrapper.
{BusinessAccess - Invocation} --<Status> -- 2014-07-28 23:40:20 -- Telldus API Dim responded with: 0
{BusinessAccess - Invocation} --<Status> -- 2014-07-28 23:40:20 -- Device with id 10, name stue, native id 10 and code 2:3 is being dimmed to level 100. Method used is TellStickWrapper.
{BusinessAccess - Invocation} --<Status> -- 2014-07-28 23:40:21 -- Telldus API Dim responded with: 0
{BusinessAccess - Invocation} --<Status> -- 2014-07-28 23:40:31 -- Device with id 10, name stue, native id 10 and code 2:3 has a nonmatching state.
{BusinessAccess - Invocation} --<Status> -- 2014-07-28 23:40:32 -- Device with id 10, name stue, native id 10 and code 2:3 is being turned off. Method used is TellStickWrapper.
{BusinessAccess - Invocation} --<Status> -- 2014-07-28 23:40:32 -- Telldus API TurnOff responded with: 0
{BusinessAccess - Invocation} --<Status> -- 2014-07-28 23:40:32 -- Device with id 10, name stue, native id 10 and code 2:3 is being turned off. Method used is TellStickWrapper.
{BusinessAccess - Invocation} --<Status> -- 2014-07-28 23:40:32 -- Telldus API TurnOff responded with: 0
{BusinessAccess - Invocation} --<Status> -- 2014-07-28 23:40:52 -- Device with id 10, name stue, native id 10 and code 2:3 has a nonmatching state.
{BusinessAccess - Invocation} --<Status> -- 2014-07-28 23:40:52 -- Device with id 10, name stue, native id 10 and code 2:3 is being dimmed to level 100. Method used is TellStickWrapper.
{BusinessAccess - Invocation} --<Status> -- 2014-07-28 23:40:52 -- Telldus API Dim responded with: 0
{BusinessAccess - Invocation} --<Status> -- 2014-07-28 23:40:52 -- Device with id 10, name stue, native id 10 and code 2:3 is being dimmed to level 100. Method used is TellStickWrapper.
{BusinessAccess - Invocation} --<Status> -- 2014-07-28 23:40:53 -- Telldus API Dim responded with: 0
{BusinessAccess - Invocation} --<Status> -- 2014-07-28 23:41:04 -- Device with id 10, name stue, native id 10 and code 2:3 has a nonmatching state.
{BusinessAccess - Invocation} --<Status> -- 2014-07-28 23:41:04 -- Device with id 10, name stue, native id 10 and code 2:3 is being turned off. Method used is TellStickWrapper.
{BusinessAccess - Invocation} --<Status> -- 2014-07-28 23:41:04 -- Telldus API TurnOff responded with: 0
{BusinessAccess - Invocation} --<Status> -- 2014-07-28 23:41:04 -- Device with id 10, name stue, native id 10 and code 2:3 is being turned off. Method used is TellStickWrapper.
{BusinessAccess - Invocation} --<Status> -- 2014-07-28 23:41:05 -- Telldus API TurnOff responded with: 0

Have you changed the "Send count", the "Send interval" and the "Receive delay"?
Try to lower "Send interval" and "Receive interval".