Bäste Isaksson
Skulle uppskatta om jag kom på rätt kurs och fick styrfart.....
Jag säger hjälp.........vad gör jag för fel har installaerat "Plugin skicka e-post för händelser i Switch King" SMTPDataSourcePlugin 1.2
Får det inte att spela med, skall bevaka en frys och när temperaturen ändrar sig mer än fem grader skall den ställa ut ett mail, felet är relaterat skit bakom spakarna från min sida känns det som
Klientversion 3.1.0.1
Serverversion 3.2.3.1
Databas 2.5.5
Windows xp professional
SMTP server, send.one.com (har one.com)
Port 465 (om jag har förstått rätt)
Temperatur sensor har i SK ID:1
I telledus center kommer temperaturen in från frysen, men i SK kommer de inte in efter att ha installaerat Plugin innan kom värderna in.
Bästa Hälsningar / Håkan
hakan@maradeza.com
--------------------------------------------------------------------------------------------------------------------------------------------
<?xml version="1.0" encoding="utf-8" ?>
<configuration>
<configSections>
<section name="smtpDatasources" type=" SMTPDataSourcePlugin.ConfigXmlSerialization, SMTPDatasources" />
</configSections>
<appSettings>
<!-- Address and port to SMTP server -->
<add key="server" value="send.one.com"/> = enl deras hemsida One.com
<add key="port" value="465"/> = Port 465 (om jag har förstått rätt) har one
<!-- Username and password to SMTP server -->
<add key="username" value="
hakan@maradeza.com"/>
<add key="password" value="xxxxx"/> = mitt lösen ord till mitt mail ?
<!-- Use SSL -->
<add key="ssl" value="true"/>
<!-- Mailaddress to send from -->
<add key="from" value="
hakan@maradeza.com"/>
<!-- Alias when sending mail -->
<add key="alias" value="Name"/>
<!-- debug Send info to windows event log [true][false] -->
<add key="debug" value="false"/>
</appSettings>
<smtpDatasources>
<!-- If you type [value] in subject or bodytext then the plugin will replace that with the actual value.
id = [int] - Unique id number
skid = [int] - SK Data Source ID
delay = [-int] - Plugin will not send same signal to mail within this time (seconds)
truesubject = [string][0] - Subject to use in email when condition is true, use 0 to ignore mail
truebodytext = [string][0] - Text to use in email when condition is true, use 0 to ignore mail
trueskvalue = [string][0] - SK Presentation Value, use "0" if you dont want to change it (use with trigger and number)
truevalue = [int][0] - New value that the plugin should use for evaluation (use with trigger and number)
falsesubject = [string][0] - Subject to use in email when condition is false, use 0 to ignore mail
falsebodytext = [string][0] - Text to use in email when condition is false, use 0 to ignore mail
trueskvalue = [string][0] - SK Presentation Value, use "0" if you dont want to change it (use with trigger and number)
truevalue = [int][0] - New value that the plugin should use for evaluation (use with trigger and number)
to = [string] - Email address to send email to (separate with "," if there is more than one address)
send = [value][trigger] - use "value" to receive mail when the datasource updates, use "trigger" to receive mail depending on whether trigger (see below) evaluates to true/false
trigger = [more][less][equal][0] - use "0" if send is set to "value", use "more", "less" or "equal" to set your own threshold values.
number = [int][0] - use "0" if send is set to "value", The number to compare with -->
<datasource id="1"
skid="1"
delay="-4"
truesubject="Temp High sensor 1"
truebodytext="Temperature is to high"
falsesubject="Temp Ok sensor 1"
falsebodytext="Temperature is now Ok"
to="
hakan@maradeza.com"
send="trigger"
trigger="more"
number="5"/>
</smtpDatasources>
</configuration>
------------------------------------------------------------------------------------------------------